info@mecmove.se

08-520 140 00

GREASABLE
LUBRICATION-FREE

smorjbarsmorjfri HEAVY DUTY

 


mwtmgt

Inches
Right
thread
Left
thread
B
+.0015
-.0005
W
+.000
-.005
H
±.005
A
±.015
D
±.010
K
±.010
J
±.010
Ball diameter
Ref.
C
+.062
-.031
Thread
UNF-2B
a° Max
static load radially
Lbs
Weight
Lbs
  MW-2**   MG-2** .1250 .250 .187 .812 .500 .312 .250 .312 .437 6-321 16 1,202 .019
  MW-3   MG-3 .1900 .312 .250 1.062 .625 .406 .312 .437 .562 10-32 13 1,531 .038
  MW-4   MG-4 .2500 .375 .281 1.312 .750 .469 .375 .500 .750 1/4-28 16 2,539 .059
  MW-5   MG-5 .3125 .437 .344 1.375 .875 .500 .437 .625 .750 5/16-24 14 3,133 .092
  MW-6   BM-6 .3750 .500 .406 1.625 1.000 .687 .562 .719 .937 3/8-24 12 3,915 .152
  MW-7   MG-7 .4375 .562 .437 1.812 1.125 .750 .625 .812 1.062 7/16-20 14 4,218 .198
  MW-8   MG-8 .5000 .625 .500 2.125 1.312 .875 .750 .937 1.187 1/2-20 12 6,660 .329
  MW-10   MG-10 .6250 .750 .562 2.500 1.500 1.000 .875 1.125 1.500 5/8-18 16 7,364 .477
  MW-12   MG-12 .7500 .875 .687 2.875 1.750 1.125 1.000 1.312 1.750 3/4-16 14 11,518 .723
  MW-14*   MG-14* .8750 .875 .765 3.375 2.000 1.300 1.125 1.375 1.875 7/8-14 7 18,476 1.030
  MW-14-1*   MG-14-1* .8750 .875 .687 3.500 2.000 1.312 1.187 1.312 1.812 7/8-14 12 22,843 1.030
  MW-163   MG-163 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.875 2.125 1 1/4-12 17 43,541 2.125
  MW-16-13   MG-16-13 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.875 2.125 1-142 17 43,541 2.410
  MW-16-23   MG-16-23 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.875 2.125 1-12 17 43,541 2.410

*On request.
** Not available with lubrication nipple.

mm

Right
thread
Left
thread
B
+.038
-.013
W
+.00
-.13
H
±.13
A
±.38
D
±.25
K
±.25
J
±.25
Ball diameter
Ref.
C
+1.57
-.79
Thread
UNF-2B
a° Max
static load radially
Newton
Weight
Gram
  MW-2**   MG-2** 3.175 6.35 4.75 20.62 12.70 7.92 6.35 7.92 11.10 6-321 16 5,344 9
  MW-3   MG-3 4.826 7.92 6.35 26.97 15.88 10.31 7.92 11.10 14.27 10-32 13 6,805 17
  MW-4   MG-4 6.350 9.53 7.14 33.32 19.05 11.91 9.53 12.70 19.05 1/4-28 16 11,297 27
  MW-5   MG-5 7.938 11.10 8.74 34.93 22.23 12.70 11.10 15.88 19.05 5/16-24 14 13,934 42
  MW-6   MG-6 9.525 12.70 10.31 41.28 25.40 17.45 14.27 18.26 23.80 3/8-24 12 17,416 69
  MW-7   MG-7 11.113 14.27 11.10 46.02 28.58 19.05 15.88 20.62 26.97 7/16-20 14 18,759 90
  MW-8   MG-8 12.700 15.88 12.70 53.98 33.32 22.23 19.05 23.80 30.15 1/2-20 12 29,624 149
  MW-10   MG-10 15.875 19.05 14.27 63.50 38.10 25.40 22.23 28.58 38.10 5/8-18 16 32,752 216
  MW-12   MG-12 19.050 22.23 17.45 73.03 44.45 28.58 25.40 33.32 44.45 3/4-16 14 51,237 328
  MW-14*   MG-14* 22.225 22.23 19.43 85.73 50.80 33.02 28.58 34.93 47.63 7/8-14 7 82,185 467
  MW-14-1*   MG-14-1* 22.225 22.23 17.45 88.90 50.80 33.32 30.15 33.32 46.02 7/8-14 12 101,601 467
  MW-164   MG-164 25.400 34.93 25.40 104.78 69.85 41.28 38.10 47.63 53.98 1 1/4-12 17 193,670 964
  MW-16-14   MG-16-14 25.400 34.93 25.40 104.78 69.85 41.28 38.10 47.63 53.98 1-142 17 193,670 1093
  MW-16-24   MG-16-24 25.400 34.93 25.40 104.78 69.85 41.28 38.10 47.63 53.98 1-12 17 193,670 1093

*On request.
** Not available with lubrication nipple.

If PTFE liner is desired, add suffix as follows: MW-6T.


Left-threaded rod ends have identification grooves at the bottom. The rod end is supplied as standard without lubrication nipple. If lubrication nipple is desired, add suffix
as follows:
Z type Zerk lubrication nipple MW-6Z
F type Flush lubrication nipple MW-6F
1 Threads 6-32 UNC.
2 Threads 1-14 UNS.
3 Tolerance variation: “D” ±.020, “A” ±.020, “B” +.0035, -.0005, “H” ±.010, “K” ±.015, “J” ±.015.
4 Tolerance variation: “D” ±.51, “A” ±.51, “B” +.089, -.013, “H” ±.25, “K” ±.38, “J” ±.38

  Conversion Table
  inch x 25.4 = millimeter
  millimeter x .0937 = inch
  inch2 x 6.4515 = centimeter2
  centimeter2 x .155 = inch2
 
  pounds x .4536 = kilogram
  kilogram x 2.2046 = pounds
  lbs per inch2 x .0703 = kg per cm2
  kg per cm2 x 14.2231 = lbs per inch2
  pounds (force) x 4.448 = newtons
  newtons x .2248 = pounds (force)
 
  Degrees C = (Degrees F – 32)(.5556)
  Degrees F = (Degrees C)(1.8) + 32

 

 

Cookies information.

Vi använder oss utav cookies för att kunna ge dig bästa möjliga upplevelse när du besöker vår webbplats. Surfar du vidare på vår webbplats godkänner du samtidigt användandet av cookies.