LUBRICATION-FREE
Steel/PTFE
| Art.nr | D2 | D1 | B | M | O | ØA | Static load | Max | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Radial
KP
|
RPM | a° | gram | |||||||
| RG 8 MTE.19 | 8 | 19-18* | 12 | 9 | 10,4 | 15,875 | 2780 | 1200 | 13 | 15 |
| RG 10 MTE.22 | 10 | 22-21* | 14 | 10,5 | 12,9 | 19,050 | 3900 | 1000 | 13 | 23 |
| RG 12 MTE.26 | 12 | 26-24.5* | 16 | 12 | 15,4 | 22,225 | 5300 | 860 | 13 | 41 |
| RG 14 MTE.29 | 14 | 29-28* | 19 | 13,5 | 16,8 | 25,400 | 6980 | 750 | 15 | 55 |
| RG 16 MTE.32 | 16 | 32-31.5* | 21 | 15 | 19,3 | 28,575 | 8780 | 660 | 15 | 75 |
| RG 18 MTE.35 | 18 | 35-34.5* | 23 | 16,5 | 21,8 | 31,750 | 10630 | 600 | 15 | 97 |
| RG 20 MTE | 20 | 40-38* | 25 | 18 | 24,3 | 34,925 | 13020 | 540 | 15 | 142 |
| * Special outer diameter | ||
|
Lubrication: Lubrication-free. PTFE and bronze armored back. Installation: Request separate tolerance table for press fit housing/shaft. |
Bearing gap: Pre tensioned to zero gap. |
Use type RG … for installation at high axial loads.
For example, for top mounting for shock absorbers. |
