GREASABLE
Steel/Bronze
Forged for extreme loads
| TYPE | D2 | B | M | O | D1 | F | L | GL | ØA | Thread | Stat. load | Weight | |||
| G | Radial | Axial | a° | gram | |||||||||||
| KP | KP | ||||||||||||||
| RM 6-X | 6 | 9 | 6.75 | 8.9 | 20 | 36 | 46 | 20 | 11,112 | M6x1 | 980 | 490 | 13 | 20 | |
| RM 8-X | 8 | 12 | 9 | 10.4 | 24 | 42 | 54 | 22 | 12,700 | M8x1,25 | 1950 | 780 | 13 | 33 | |
| RM 10-X | 10 | 14 | 10.5 | 12,9 | 28 | 48 | 62 | 25 | 15,875 | M10x1,5 | 3140 | 1130 | 13 | 56 | |
| RM 12-X | 12 | 16 | 12 | 15,4 | 32 | 54 | 70 | 29 | 19,050 | M12x1,75 | 4220 | 1520 | 13 | 87 | |
| RM 14-X | 14 | 19 | 13,5 | 16,8 | 36 | 60 | 78 | 38 | 25,400 | M14x2 | 5690 | 1950 | 15 | 129 | |
| RM 16-X | 16 | 21 | 15 | 19,3 | 42 | 66 | 87 | 40 | 28,575 | M16x2 | 6720 | 3450 | 15 | 189 | |
| RM 18-X | 18 | 23 | 16,5 | 21,8 | 46 | 72 | 95 | 44 | 31,750 | M18x1,5 | 8140 | 2940 | 15 | 267 | |
| RM 20-X | 20 | 25 | 18 | 24,3 | 50 | 78 | 103 | 47 | 34,925 | M20x1,5 | 9370 | 3530 | 15 | 348 | |
| RM 22-X | 22 | 28 | 20 | 25,8 | 54 | 84 | 111 | 51 | 38,100 | M22x1,5 | 11380 | 4340 | 15 | 443 | |
| RM 25-X | 25 | 31 | 22 | 29,6 | 60 | 94 | 124 | 57 | 42,850 | M24x2 | 13540 | 5350 | 15 | 600 | |
| RM 30-X | 30 | 37 | 25 | 34,8 | 70 | 110 | 145 | 66 | 50,800 | M30x2 | 18440 | 7210 | 15 | 1030 | |
| RM 35-X | 35 | 43 | 28 | 37,7 | 80 | 125 | 165 | 75 | 57,150 | M36x2 | 23000 | 9500 | 15 | 1500 | |
Thread: ISO-DIN 13-6H.
For left-thread type RML…X.
Lubrication: Through the lubrication nipple on the shaft through a channel up to the bearing.
Bearing gap: Radial 0,030-0,050 mm. Axially 0,050-0,090 mm. Reduced or larger gap can be delivered.
Special design: Chromium plated, chemical nickel plating, hard chromed inner ring, special grease, stainless steel, fine threaded etc.