info@mecmove.se

+46 8 52014000

Pulley wheels made of Nylon

Nylon

Pulley wheels made of nylon, polyamide. Comes in black or white. Sliding bearing directly in the hub (without bushing). Can be processed and retrofitted with sliding bearings.

If the wheel is desired to be mounted on a shaft, this can be done by press fit, through the hub or by a stop screw with recessed hole through the groove threaded down to the shaft hole.

Linhjul av Nylon
Ritning på Linhjul av Nylon

Pulley wheels made of Polyamide

Art.nr ØD1
Outer diameter
 ØD2
Groove diameter
 b
Width
 B
Hub width
 Ød
Shaft hole
 d2Ø
Hub diameter
 h
Groove depth
 R
Max Ø (mm)
 Max. bel
Kg
  V 020-1 20 14 9 9.8 6.1 14 3 7 15
  V 020-2 20 14 9 9.8 6.5 14 3 7 15
  V 020-3 20 14 9 9.8 6.8 14 3 7 15
  V 020-4 20 14 9 9.8 8.5 14 3 7 15
  V 030-1 30 24 10 10 6.2 14 3 7 35
  V 030-2 30 22 14 14 8.5 12 4 7 35
  V 030-4 30 24 10 10 8,3 14 3 7 35
  V 030-5 30 24 10 10 8,4 14 3 7 35
  V 030-6 30 24 10 10 8.5 14 3 7 35
  V 034-1 34 28 12 12 8.8 12 3 12 30
  V 040-1 40 34 10 10 6.2 20 3 7 35
  V 042-1 42 34 14 12 8.8 12 4 13 35
  V 050-1 50 42 10 12 8,3 12 4 7 40
  V 050-2 50 42 10 12 10 12 4 7 40
  V 080-1 80 73 10 10 10 20 3.5 7 60
  V 100-1 100 92 10 10 10 20 4 7 70
  A 051-1 51 41 9.7 10.6 6.1 13 5 4 30
  A 061-1 61 51 10.2 10.4 6.1 17 5 4 60
  A 073-1 73 56 12.7 18.3 10.1 19 3.5 4 60
  A 100-1* 100 74 24.2 24.6 25.8-27 40 3 8 150
  E 040-1 40 32 11.7 15.3 6.1 16 4 8 35
  E 048-1 48 40 11.7 15.3 8.2 18 4 8 40
  E 050-1 50 42 10.1 11 15.2 25 4 4 40
  E 060-1 60 37 29.5 16.6 12.2 – 11.5 20 90
  E 065-1 65 57 11.5 15.2 8.1 18 4 8 50
  E 073-1 73 65 13 16.5 10.2 23 4 8 55
  E 076-1 76 65 15.2 16.8 11.4 24 5.5 10 75
  E 080-1 80 62 21.5 24.3 12.2 33 9 11 140
  E 090-1 90 70 17.7 21 10.2 23 10 8 130
  E 100-1 100 85 12 16.6 10.2 32 7.5 3 85
  E 100-2 100 75 25.5 28.6 15.2 43 12.5 15 210
  E 100-3 100 68 42 26 20.2 – 16 28 270
  E 120-1 120 88 28 33 15.2 40 16 18 300
  E 126-1 126 102 34 42 30.2 70 12 14 500
  E 150-1 150 110 33 42 20.2 46 20 25 410

* For the addition of 2 ball bearings with YD 26 mm (raised center distance)