info@mecmove.se

Angular links / Angle ball joints AS, BS

Flera vinkellänkar/vinkelkulleder

Angular links DIN 71802

Angular links according to DIN 71802 are a machine product for transmitting static force that allows for and compensates for angular misalignment. They function as guides for simple movement frequencies, for example, in linear compression, pulling motions, or shaft compensation. Typical applications for angular links are pneumatic cylinders, gas cylinders, and link systems where lighter, slow loads and movements occur.
 
Angular links: Materials and designs

Our angular links are supplied in pre-galvanized automatic steel, as well as stainless steel A2. In both cases, they are delivered with a nut on the spherical pin. Available in both right-hand and left-hand threaded designs (left-hand thread only on the internal thread of the spherical cup).

Sealing

Both the pre-galvanized and stainless steel versions can be supplied with a sealed design that protects the spherical housing from dust and dirt.

Angular links execution AS / CS DIN 71802

Vinkellänkar/vinkelkulleder Utförande AS CS DIN 71802​
Art.nr d1
H9/h9
d2 d3 I2
±0,3
I3
±0,3
a
±0,3
e
min.
SW Weight/each
kg
AS 08-M5 8 M5 8 10,2 9 22 10,2 7 0,015
AS 10-M6 10 M6 10 12,5 11 25 11,5 8 0,025
AS 13-M8 13 M8 13 16,5 13 30 14 11 0,053
AS 16-M10 16 M10 16 20 16 35 15,5 13 0,104
AS 16-M12 16 M12 16 20 16 35 15,5 13 0,104
AS 19-M14 19 M14 22 28 20 45 21,5 16 0,221
AS19-M14x1,5 19 M14x1,5 22 28 20 45 21,5 16 0,221
AS19-M16x2 19 M16 22 28 20 45 21,5 16 0,221

Form AS with securing clip

When it comes to left-hand threaded insert, add an “L” after the item number (only for left-hand threaded ball studs)

For stainless steel, add “RF” after the item number. With protective seal, add “T” after the item number.

Ball stud:Carbon steel (surface hardness > 55 HRc)
Ball socket:Steel 9sMnPb28
Surface treatment:Electroplated with a glossy zinc coating (or untreated if desired)

Complete angle rod linkage

Vinkellänkar komplett vinkellänkstång

Stainless steel construction

Vinkellänkar rostfritt utförande

With protective seal

Vinkellänkar med skyddstätning AS / CS

Angular links execution BS DIN 71802

Vinkellänkar/vinkelkulleder utförande BS DIN 71802​
Art.nrD1D2D5L4L2D3AH2ED4D6
BS 08 5×48M554982217.510.212.88
BS 08 5×7.58M557.598222010.212.88
BS 10 6×4.510M664.51110252111.514.810
BS 10 6×810M6681110252411.514.810
BS 13 8×513M885131330251419.313
BS 13 8×1013M8810131330301419.313
BS 16 10×616M1010616163531.515.52416
BS 16 10×1316M10101316163537.515.52416
BS 19 14×1219M14 x 1.5141220224542.521.53019
BS 19 14×1819M14 x 1.5141820224548.521.53019

Form BS with securing clip

For stainless steel, add “RF” after the item number.
With protective seal, add “T” after the item number.

Ball stud:Carbon steel (surface hardness > 55 HRc)
Ball socket:Steel 9sMnPb28
Surface treatment:Electroplated with a glossy zinc coating (or untreated if desired)

With protective seal

vinkellänkar/vinkelkulleder med skyddstätning BS

Ball socket DIN 71805

Kulpanna form A

Form A
Ball socket with retaining ring

 

ØaThreadArt.nr
8M5A 8
10M6A 10
13M8A 13
16M10 / M12A 16
19M14 / M16A 19
Kulpanna form B

Form B
Ball socket with retaining ring and groove for safety clip

ØaThreadArt.nr
8M5B 8
10M6B 10
13M8B 13
16M10 / M12B 16
19M14 / M16B 19

Kultapp DIN 71803

Kultapp form A

Form A
Threaded pin

ØaThreadArt.nr
8M5A 8
10M6A 10
13M8A 13
16M10 / M12A 16
19M14 / M16A 19
Kultapp form B

Form B
Rivet pin

Øa Art.nr
8 B8 x 4
B8 x 7,5
10 B10 4,5
B10 x 8
13 B13 x 5
B13 x 10
16 B16 x 6
B16 x 13
19 B19 x 12
B19 x 18

Retaining ring R DIN 71805

Sprängring R DIN 71805
Art.nr m n
R8 6.8 1
R10 8.9 1.2
R13 11.2 1.5
R16 14 1.8
R19 17 2

Safety clip S DIN 71805

Säkringsbygel S DIN 71805
Art.nr k l
S8 7 10.5
S10 8.7 12.5
S13 11 15.7
S16 13 19
S19 20 24

Cookies information.

Vi använder oss utav cookies för att kunna ge dig bästa möjliga upplevelse när du besöker vår webbplats. Surfar du vidare på vår webbplats godkänner du samtidigt användandet av cookies.