info@mecmove.se

+46 8 52014000

Series AW & AG

GREASABLE
LUBRICATION-FREE

smorjbarsmorjfriEXTRA HEAVY DUTY
Chrome Molly

 

awag[popup_anything id=”7150″]

 

Inches
Right
thread		 Left
thread		 B
+.0015
-.0005		 W
+.000
-.0005		 H
±.005		 A
±.010		 D
±.010		 K
±.010		 J
±.010		 G
±.010		 Ball dia.
Ref.		 C
+.062
-.031		 Thread
UNF-3B		 a° Max
static load
radially
Lbs		 Weight
Lbs
  AW-3   AG-3 .1900 .312 .250 1.062 .625 .406 .312 .312 .437 .562 10-32 13 3,733 .038
  AW-4   AG-4 .2500 .375 .281 1.312 .750 .469 .375 .312 .500 .750 1/4-28 16 6,190 .059
  AW-5   AG-5 .3125 .437 .344 1.375 .875 .500 .437 .406 .625 .750 5/16-24 14 7,639 .092
  AW-6   AG-6 .3750 .500 .406 1.625 1.000 .687 .562 .469 .719 .937 3/8-24 12 9,544 .152
  AW-7   AG-7 .4375 .562 .437 1.812 1.125 .750 .625 .531 .812 1.062 7/16-20 14 10,285 .198
  AW-8   AG-8 .5000 .625 .500 2.125 1.312 .875 .750 .594 .937 1.187 1/2-20 12 16,238 .329
  AW-10   AG-10 .6250 .750 .562 2.500 1.500 1.000 .875 .750 1.125 1.500 5/8-18 16 17,955 .477
  AW-12   AG-12 .7500 .875 .687 2.875 1.750 1.125 1.000 .875 1.312 1.750 3/4-16 14 28,081 .723
  AW-14*   AG-14* .8750 .875 .765 3.375 2.000 1.300 1.125 .937 1.375 1.875 7/8-14 7 45,051 1.030
  AW-161   AG-161 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.250 1.875 2.125 1-1/4-12 17 76,200 2.125
  AW-16-11   AG-16-11 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.250 1.875 2.125 1-143 17 76,200 2.410
  AW-16-21   AG-16-21 1.0000 1.375 1.000 4.125 2.750 1.625 1.500 1.250 1.875 2.125 1-12 17 76,200 2.410

*On request.

mm
Right
thread		 Left
thread		 B
+.038
-.013		 W
+.00
-.13		 H
±.13		 A
±.25		 D
±.25		 K
±.25		 J
±.25		 G
±.25		 Ball dia.
Ref.		 C
+1.57
-.79		 Thread
UNF-3B		 a° Max
static load
radially
Newton		 Weight
Gram
  AW-3   AG-3 4.826 7.92 6.35 26.97 15.88 10.31 7.92 7.92 11.10 14.27 10-32 13 16,602 17
  AW-4   AG-4 6.350 9.53 7.14 33.32 19.05 11.91 9.53 7.92 12.70 19.05 1/4-28 16 27,535 27
  AW-5   AG-5 7.938 11.10 8.74 34.93 22.23 12.70 11.10 10.31 15.88 19.05 5/16-24 14 33,978 42
  AW-6   AG-6 9.525 12.70 10.31 41.28 25.40 17.45 14.27 11.91 18.26 23.80 3/8-24 12 42,450 69
  AW-7   AG-7 11.113 14.27 11.10 46.02 28.58 19.05 15.88 13.49 20.62 26.97 7/16-20 14 45,745 90
  AW-8   AG-8 12.700 15.88 12.70 53.98 33.32 22.23 19.05 15.09 23.80 30.15 1/2-20 12 72,231 149
  AW-10   AG-10 15.875 19.05 14.27 63.50 38.10 25.40 22.23 19.05 28.58 38.10 5/8-18 16 79,861 216
  AW-12   AG-12 19.050 22.23 17.45 73.03 44.45 28.58 25.40 22.23 33.32 44.45 3/4-16 14 124,910 328
  AW-14*   AG-14* 22.225 22.23 19.43 85.73 50.80 33.02 28.58 23.80 34.93 47.63 7/8-14 7 200,387 467
  AW-162   AG-162 25.400 34.93 25.40 104.78 69.85 41.28 38.10 31.75 47.63 53.98 1-1/4-12 17 338,937 964
  AW-16-12   AG-16-12 25.400 34.93 25.40 104.78 69.85 41.28 38.10 31.75 47.63 53.98 1-143 17 338,937 1093
  AW-16-22   AG-16-22 25.400 34.93 25.40 104.78 69.85 41.28 38.10 31.75 47.63 53.98 1-12 17 338,937 1093

*On request.

If PTFE liner is desired, add suffix as follows: AW-6T.

1 Tolerance variation: “D” ±.020, “A” ±.020, “B” +.0035, -.0005, “H” ±.010. Thread 2B. On request.
2 Tolerance variation: “D” ±.51, “A” ±.51, “B” +.089, -.013, “H” ±.25. Thread 2B. On request.
3 Thread 1-14 UNS.
The rod end is supplied as standard without lubrication nipple. If lubrication nipple is desired, add suffix
as follows:
Z type Zerk lubrication nipple AW-6Z
F type Flush grease nipple AW-6F

 

  Conversion table
  inch x 25.4 = millimeter
  millimeter x .0937 = inch
  inch2 x 6.4515 = centimeter2
  centimeter2 x .155 = inch2
 
  pounds x .4536 = kilogram
  kilogram x 2.2046 = pounds
  lbs per inch2 x .0703 = kg per cm2
  kg per cm2 x 14.2231 = lbs per inch2
  pounds (force) x 4.448 = newtons
  newtons x .2248 = pounds (force)
 
  Degrees C = (Degrees F – 32)(.5556)
  Degrees F = (Degrees C)(1.8) + 32

 

 

 

Cookie information

We use cookies to be able to give you the best possible experience when you visit our website. If you continue to surf on this site, you also agree to the use of cookies.

I agree