Are of use
Similar to conventional VP bushings, but the inner sleeve is radially displaced in relation to the outer. This enables an increase rubber thickness and thus greater flexibility in the normal load direction, while maintaining control in other respects and possibility of torsional movements. The rubber section is profiled to eliminate harmful tensile stresses. Applications mounts for vehicle springs, bushing for tipping cabs and engine mounts.
Characteristics
A very durable, flexible storage. These have a large rubber section with the center hole offset in the radial direction. These bushings offer a relatively large radial deflection and has excellent characteristics for motion control.
Benefits:
• Capacity to carry high loads
• Allows movement in several directions
• Reduces stress on surrounding machine components
• Fault-proof design (steel / rubber can not slide apart)
Areas of use:
• Machine designs that require flexibility
• Train / rail constructions
• Bias control units
• Agricultural vehicles
| Art.nr | A | B | C | D | E | Stiffness (N/mm) | Max deflection (mm) | Max load (kg) | Stiffness (N/mm) |
|---|---|---|---|---|---|---|---|---|---|
| ECC1270-45 | 16 | 476 | 50.8 | 63.5 | 7.1 | 675 | 2 | 140 | 1350 |
| ECC1270-60 | 16 | 47.6 | 50.8 | 63.5 | 7.1 | 1040 | 2 | 215 | 2080 |
| ECC1270-75 | 16 | 47.6 | 50.8 | 63.5 | 7.1 | 1200 | 2 | 245 | 2400 |
| ECC2174-45 | 24 | 75.3 | 51 | 70 | 10.5 | 750 | 3.5 | 270 | 600 |
| ECC2174-60 | 24 | 75.3 | 51 | 70 | 10.5 | 1200 | 3.5 | 325 | 910 |
| ECC2174-75 | 24 | 75.3 | 51 | 70 | 10.5 | 1760 | 3.5 | 630 | 1400 |
| ECC1165-45 | 25.4 | 88.9 | 66.7 | 79.4 | 14.3 | 475 | 3.8 | 185 | 640 |
| ECC1165-60 | 25.4 | 88.9 | 66.7 | 79.4 | 14.3 | 900 | 3.8 | 350 | 990 |
| ECC1355-45 | 43.7 | 101.6 | 63.5 | 72.4 | 9.5 | 682 | 3.5 | 245 | 1150 |
| ECC1355-60 | 43.7 | 101.6 | 63.5 | 72.4 | 9.5 | 1300 | 3.5 | 465 | 2200 |