General information about rubber hangers HNG-S
Rubber hanger HNG-S is a vibration damping unit for insulating interference frequencies in e.g. pipelines up to concrete roofs. As well as provide some elastic suspension to allow movement due to compression and expansion. The design ensures non-fallout even if the rubber unit should give way.
Versions
- Available in rubber hardness 43 °, 55° and 70 ° shore
- Threaded bolt in medium length, nut and washer included.
Other bolt lengths are available as options as below.
Suitable for mounting to:
- Cooling unit
- Air conditioning unit
- Fans
- Air and water pipes
- All kinds of pipes for industrial use
- Heat pumps
- Pump and heating pipes
| Type | B | H | L | D | h | s1 | s2 | d1 | d2 | d3 |
| HNG-S1 | 40 | 60 | 45 | 30 | 28 | 3 | 2 | 22,5 | 8,5 | 25 |
| HNG-S2 | 60 | 80 | 55 | 40 | 33 | 3 | 3 | 27 | 10,5 | 30 |
| HNG-S3 | 80 | 100 | 70 | 60 | 54 | 4 | 3 | 45 | 12,5 | 50 |
Order example: HNG-S2-40 (40 shore hardness) |
M10 and M12 x lengths 100 to 200 mm